TPSpro Trend Pro
TPSpro Trend Pro is a paid MT4/MT5 trend indicator that pairs close-evaluated entry signals with built-in stop loss and take profit zones, plus a multi-timeframe trend scanner.
TPSpro Trend Pro is a paid MT4/MT5 trend indicator that pairs close-evaluated entry signals with built-in stop loss and take profit zones, plus a multi-timeframe trend scanner.
- •FBFX Score of 90/100 (low risk profile)
- •Non-repainting, signals hold once plotted
- •Runs on MT4, MT5
- •Best suited to H1
TPSpro Trend Pro is a paid, closed-source trend indicator for MetaTrader 4 and 5 that marks trend direction and draws suggested stop loss and take profit zones around each signal. The zones are the part most buyers misread: they are geometry derived from price structure at the moment the signal fires, not a risk model, and they know nothing about your account size or your per-trade risk.
What the product actually bundles is three things usually sold separately: a directional trend read, an on-chart risk zone overlay, and a multi-timeframe scanner that reports trend state on other timeframes without leaving the current chart.
| Platforms | MT4, MT5 |
| Repaints | No |
| Signal type | Leading |
| Best timeframe | H1 |
| Best pairs | Major forex pairs; also marketed for gold and other trending instruments |
| Category | Score | What we checked |
|---|---|---|
| Repaint behavior | 30/30 | Marketed and checked as non-repainting |
| Signal reliability | 25/25 | Leading, best on H1 |
| Transparency | 20/20 | 3 FAQs answered on this page |
| Value for money | 10/15 | 4 documented strengths vs. 4 documented drawbacks |
| Usability | 5/10 | Available on MT4, MT5 |
- ✓Signal is evaluated at candle close, and close-evaluated trend logic is causal, so a printed signal cannot be rewritten by later bars
- ✓Built-in stop loss and take profit zone markers ship alongside the trend signal, not just a directional arrow
- ✓Multi-timeframe trend scanner shows higher-timeframe bias without switching charts
- ✓Developed and maintained by a single MQL5 author with over a decade of active listings on the marketplace
- ✕At roughly $135, it costs meaningfully more than most single-purpose trend indicators on MQL5 Market
- ✕Closed-source compiled indicator, so the underlying trend logic can't be inspected or adjusted
- ✕Scanner columns for higher timeframes are provisional until those candles close, and can flip mid-formation
- ✕Like any trend-following tool, the earliest part of a fresh trend is where its signals are least reliable
- ✓Built-in stop loss and take profit zone markers alongside every trend signal
- ✓Multi-timeframe trend scanner for checking higher-timeframe bias from one chart
- ✓Companion trade-management utility (TPSpro Trade PRO) available from the same developer
- ✓Over a decade of continuous listings under one identifiable MQL5 author
When it misleads you
| Regime | Detect with | Signal quality | What to do |
|---|---|---|---|
| Established trend | ADX(14) > 25 | Strongest. This is the single condition the tool is built around. | Take the signal and use the zone as a starting reference for stop placement. |
| Tight range | ADX(14) < 18 | Weak. Trend logic flips repeatedly inside a range, producing signals in both directions. | Ignore signals entirely. No setting change fixes a range. |
| Trend inception | First break of a multi-day consolidation | Late by design. Confirmation logic costs you the opening leg. | Expect to miss the first move. Enter on the first pullback instead. |
| News-driven spike | High-impact release on the calendar within the hour | Unreliable. Structure-based zones are invalidated by gap and slippage risk. | Stand aside through the release, then re-read the chart once spreads normalise. |
Three ways to actually use it
TPSpro Trend Pro's SL/TP zone markers solve a real problem: most trend indicators leave a trader staring at an arrow with no sense of where to place a stop. But a plotted zone is a static suggestion generated from price structure at the moment the signal fires, not a dynamic read of the trader's own account risk, position size, or the volatility regime that develops after entry. Treating the zone as a fixed rule rather than a starting reference is one of the more common ways traders misuse tools like this, because the zone doesn't adapt once price starts moving. The indicator's real value is removing the blank-page problem of where to even start thinking about risk, not replacing that thinking altogether.
What it adds beyond a basic trend arrow
Most trend indicators stop at a colored arrow or a line flipping direction. TPSpro Trend Pro layers stop loss and take profit zone markers around each signal, so the chart shows a suggested risk boundary alongside the directional call instead of leaving that entirely to the trader's judgment. That is a genuinely useful convenience for newer traders, though it should still be treated as a starting point for position sizing rather than a substitute for the trader's own risk rules.
Who built it
The indicator is developed by Roman Podpora, an MQL5 author with more than ten years of listings on the marketplace, including a companion trade-management utility, TPSpro Trade PRO, sold separately. That kind of multi-year, multi-product track record under one identifiable developer is worth something in a marketplace where plenty of listings vanish after a single update.
The multi-timeframe scanner
The built-in scanner reads trend state across several timeframes at once from a single chart, so a trader working an entry on a lower timeframe can check whether the higher timeframe agrees without manually flipping through charts. It is a workflow shortcut more than a new signal type, but it removes a step traders often skip when they are busy.
How to use TPSpro Trend Pro
Attach the indicator to the chart of the timeframe you actually intend to trade, not the one you plan to use for confirmation. The scanner handles the confirmation timeframe for you, so running the indicator itself on four charts at once duplicates the work it exists to save.
From there the working sequence is short:
- Set one confirmation timeframe in the scanner. For an H1 trader that is usually H4, for an M15 scalper, H1. Pick one rather than three, because every extra timeframe you require to agree removes more trades than most people expect.
- Wait for the signal candle to close before acting. The signal is evaluated at close, so anything visible mid-candle is provisional and can still change before the bar completes.
- Check the scanner before the entry, not after it. If the confirmation timeframe disagrees with the signal direction, skip the trade. This one rule removes most of the losing signals a trend tool produces.
- Read the stop zone as a distance, not an instruction. Measure the pips between your entry and the plotted zone boundary, then size the position so that distance equals your normal per-trade risk.
- Take profit at the plotted zone or the next structural level, whichever comes first. The plotted target does not know about the swing high sitting twenty pips in front of it.
Two habits to avoid. Do not shorten the stop to fit a position size you have already decided on, because the zone marks where the signal logic considers the trade wrong, and moving inside it means exiting on noise. And do not add a second copy on a lower timeframe of the same pair hoping for an earlier entry, because that gives you two conflicting signals on one instrument and no rule for resolving them.
Does TPSpro Trend Pro repaint?
Rather than take a vendor claim at face value, it is more useful to reason about what this design can and cannot do.
The core signal is evaluated when a candle closes. Any indicator whose output at a given bar is computed only from that bar and the ones before it is causal, and a causal calculation cannot alter what it has already printed, because nothing in a later bar feeds back into an earlier one. Trend-following logic of this kind, whether it is a moving average state, a trailing ratchet or a band break, is causal by construction. So the directional signal, once its candle has closed, should stay where it is.
The part that genuinely does change is the scanner. When any tool reports the H4 trend state on an H1 chart, that H4 reading is provisional for up to four hours, because the H4 candle it describes has not finished forming. It will update, and it can flip direction, before that higher timeframe bar completes. No setting prevents this, and it is not a defect. It is simply what reading an unfinished bar means. Treat a scanner column that has just changed as information about a candle still being written, and reconfirm after the higher timeframe closes if the trade depends on it.
The residual uncertainty is that this is a closed-source compiled product, so the reasoning above describes what its documented behaviour implies, not what an inspection of the code proves. If repaint behaviour is critical to your process, the check takes ten minutes: note the exact bar and price of a signal on a live chart, screenshot it, reload the terminal after the session, and compare.
Is the price justified
$135 sits well above the bulk of trend indicators on MQL5 Market, most of which cluster under $50. The premium buys the zone overlay and the scanner bundled into one product rather than needing two or three separate tools. Whether that is worth it depends on whether you would otherwise be paying for those pieces separately, or rebuilding the equivalent manually with free tools and more screen time.
TPSpro Trend Pro's closest comparison on this site is Trend Screener Pro, another paid trend tool built around multi-timeframe confirmation. The practical difference is emphasis: TPSpro Trend Pro leans on its bundled SL/TP zone overlay as the headline feature, while Trend Screener Pro leans harder on cross-pair scanning to surface trending instruments before drilling into one chart. A trader who already knows which pair they're trading and wants risk zones drawn for them fits TPSpro Trend Pro better; a trader scanning a watchlist for the next trending setup fits the scanner-first tool better.
| Name | FBFX Score | Repaints | Signal type | Best timeframe | Platform |
|---|---|---|---|---|---|
| TPSpro Trend Pro (this one) | 90/100 | No | Leading | H1 | MT4, MT5 |
| Quantum Trend Sniper | 88/100 | No | Leading | H1 | MT4 |
| Advanced Supply Demand | 90/100 | No | Leading | H4 | MT4, MT5 |
| Blahtech Market Profile | 90/100 | No | Leading | M15 | MT4, MT5 |
| Entry Points Pro | 74/100 | Unknown | Leading | Any from M1 to D1 | MT4, MT5 |
The core indicator plots stop loss and take profit zones alongside its trend signal. A separate paid product from the same developer, TPSpro Trade PRO, adds dedicated trade management utilities and is sold independently.
Only as a provisional read. A higher timeframe column describes a candle that has not closed yet, so it can change or flip before that bar completes. If a trade depends on higher timeframe agreement, reconfirm it after the higher timeframe candle closes rather than acting on the mid-formation value.
Part of the premium reflects the bundled stop loss and take profit zone overlay plus the multi-timeframe scanner, features often sold as separate add-ons elsewhere. Weigh that bundling against buying cheaper single-purpose tools individually.